top of page

Load data for .221 Rem. Fireball + .224 | 55gr | Berger Target FB

Recommended Powder(s):

.221 Rem. Fireball + .224 | 55gr | Berger Target FB

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 55gr | Berger Target FB
Manufacturer SKU:
22410
Bullet Weight:
55gr | 3.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
<<locked>>
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
<<locked>>
Seated Depth:
<<locked>>
Shank Seated Depth:
<<locked>>
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B888_C125
Last updated:
2026-02-04

Load data for 28 loads in caliber .221 Rem. Fireball with .224 | 55gr | Berger Target FB bullet and 14 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
96%
39639
85%
**69
99%
[Accurate 1680]*
<<locked>>
87%
41220
89%
**97
93%
[Alliant Reloder-10x]*
<<locked>>
96%
32242
69%
**05
92%
Alliant Reloder-7
<<locked>>
96%
41713
90%
**40
96%
Hodgdon TrailBoss
<<locked>>
96%
27093
58%
**03
100%
IMR 4198
<<locked>>
96%
36492
79%
**31
95%
IMR 4227 👍
<<locked>>
90%
41466
89%
**94
98%
Lovex S053 👍
<<locked>>
90%
40828
88%
**94
100%
Norma 200
<<locked>>
97%
36550
79%
**03
95%
ReloadSwiss RS 14
<<locked>>
94%
25759
55%
**26
100%
ReloadSwiss RS 36
<<locked>>
91%
41539
90%
**40
98%
SNPE Vectan BA6 1/2
<<locked>>
93%
40930
88%
**69
100%
Vihtavuori N110
<<locked>>
85%
41510
89%
**57
100%
Vihtavuori N120
<<locked>>
97%
37057
80%
**77
99%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2207]*
<<locked>>
81%
24642
53%
**85
93%
[Accurate 1680]*
<<locked>>
82%
34577
74%
**56
90%
[Alliant Reloder-10x]*
<<locked>>
92%
27963
60%
**87
90%
[Alliant Reloder-7]*
<<locked>>
82%
27180
59%
**98
90%
Hodgdon TrailBoss
<<locked>>
91%
24918
54%
**54
100%
[IMR 4198]*
<<locked>>
86%
27746
60%
**95
90%
IMR 4227
<<locked>>
81%
31778
68%
**84
95%
Lovex S053
<<locked>>
81%
31386
68%
**90
98%
[Norma 200]*
<<locked>>
86%
25773
56%
**28
90%
ReloadSwiss RS 14
<<locked>>
87%
22713
49%
**50
100%
[ReloadSwiss RS 36]*
<<locked>>
81%
30211
65%
**87
94%
SNPE Vectan BA6 1/2
<<locked>>
81%
29588
64%
**52
100%
Vihtavuori N110
<<locked>>
81%
36695
79%
**69
100%
[Vihtavuori N120]*
<<locked>>
81%
23351
50%
**06
94%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page